damn that was a pain in the ass to put in...theres so many things you need to undo but its worth it in the long run
just thought i would share
just thought i would share
Ice froggy frog
<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by Seawolf:
Where in God's Green Earth did you find a pair of those removal tools?!? Aside from snap-on or Matco, I can't find any dealer or audio shop that has 'em!
![Image]()
<hr></blockquote>
A fellow jetter had a set from his dealer. I ahve seen them on ebay for like $9.00
Where in God's Green Earth did you find a pair of those removal tools?!? Aside from snap-on or Matco, I can't find any dealer or audio shop that has 'em!
A fellow jetter had a set from his dealer. I ahve seen them on ebay for like $9.00
um you can make a pair with a metal coat hanger!
just cut it and bend to a U shape, installin the radio holes and push towards the side windows, the radio will come right out.
just cut it and bend to a U shape, installin the radio holes and push towards the side windows, the radio will come right out.
<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by vision:
I thought they were an easy installation?
<hr></blockquote>
Oh, it is!!!
![Image]()
Remove radio, remove 4 radio bezel bolts, disconnect lighter & hazard button, remove nobs, remove 6 screws that hold the stock bezel on, remove 3 screws that hold the controls on the stock bezel.
Do the reverse with the SVT bezel in place.
It isn't just "trim rings". you replace the entire housing.
I thought they were an easy installation?
<hr></blockquote>
Oh, it is!!!
Remove radio, remove 4 radio bezel bolts, disconnect lighter & hazard button, remove nobs, remove 6 screws that hold the stock bezel on, remove 3 screws that hold the controls on the stock bezel.
Do the reverse with the SVT bezel in place.
It isn't just "trim rings". you replace the entire housing.
<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by CTZX3:
um you can make a pair with a metal coat hanger!
just cut it and bend to a U shape, installin the radio holes and push towards the side windows, the radio will come right out.<hr></blockquote>
i just did this yesterday (i wanted to paint my radio/ac surround piece) it works. i had heard of some people having problems using coat hangers, but it came right out for me. the only issue i had was that the coat hangers got stuck, but a pair of pliers and a nice hard tug fixed that.
Nate
um you can make a pair with a metal coat hanger!
just cut it and bend to a U shape, installin the radio holes and push towards the side windows, the radio will come right out.<hr></blockquote>
i just did this yesterday (i wanted to paint my radio/ac surround piece) it works. i had heard of some people having problems using coat hangers, but it came right out for me. the only issue i had was that the coat hangers got stuck, but a pair of pliers and a nice hard tug fixed that.
Nate
<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by vision:
I thought they were an easy installation?
I thought you were to just pop off the 3 nobs then snap off the old masking, then snap the silver masking off the new ....thingie
![Image]()
and snap it on where the old one was?
i think youall might have done it the harder way ehh<hr></blockquote>
feh! you wish it was that easy! the hvac control is a single unit and the entire plate needs to be removed in order to switch them.
Nate
I thought they were an easy installation?
I thought you were to just pop off the 3 nobs then snap off the old masking, then snap the silver masking off the new ....thingie
i think youall might have done it the harder way ehh<hr></blockquote>
feh! you wish it was that easy! the hvac control is a single unit and the entire plate needs to be removed in order to switch them.
Nate
Can someone please tell me where to get these. My dealer sucks, and they can't find it, even with the part number. Does focuscentral sell just the bezels. Thanks
<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by Team-Black:
Where are the 6 screws located?????
I know of four inside the radio opening.
Where are the other two???
Help please...i'm lost.
Thanks in advance.<hr></blockquote>
Check out my how to, there is only 4.
[ 08-02-2002: Message edited by: NacronSE ]</p>
Where are the 6 screws located?????
I know of four inside the radio opening.
Where are the other two???
Help please...i'm lost.
Thanks in advance.<hr></blockquote>
Check out my how to, there is only 4.
[ 08-02-2002: Message edited by: NacronSE ]</p>
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
