Ford Focus Forum banner
1 - 20 of 20 Posts

greg ZTS2

· Registered
Joined
·
1,822 Posts
Discussion starter · #1 ·
Just like this..........

Image


Image


Image



"HOW THE [censored] DID THAT WORK???????????
Image
Image
Image


Image


We needed it in the driveway to do this........

Image


Ah, the joys of a lowered Foci. that is Shock ZTS' car. Here is a shot of mine.

Image


Give me some feedback on our engineering skillz!!!!!!
Image
Image
Image
Image
 
Discussion starter · #3 ·
no 2x8's my friend, those are 2x4's!!!!!! We live on the edge here in Missouri!!!!!!!!!
Image
Image
Image
Image
 
Discussion starter · #7 ·
I did the enclosure myself! Those are JL12W6's in about 4cuft. of space. The floor is raised up about 5.25" but there is still room in there to put two 50 gal. coolers filled with kool-aid!!!!!!!
Image
Image


Hillbilly engineering is the best engineering ever invented!!
Image
Image
Image
Image


I think the drop is 2". Not sure what kind of springs though.
 
OK now I know why I'm not to enthusiastic to lower my focus/put a body kit on it. You consider THAT a steep/bad driveway. I bottom out my STOCK height focus on driveways here! They all are steeper than that or have an "apron" on them (which here is just a 1-2 inch curb to keep the crap they put on the roads in the winter here from poring into a downhill driveway.)

Also what do u do about steep ROADS, rough pavement, road construction, potholes, or speed bumps/humps? I don't see how it would even be possible to drive a car like that in my area!

Like the wheels/system though.
 
Discussion starter · #12 ·
the grass was to wet so we went with this route. It actually worked better than I thought it would.
 
OK now I know why I'm not to enthusiastic to lower my focus/put a body kit on it. You consider THAT a steep/bad driveway. I bottom out my STOCK height focus on driveways here! They all are steeper than that or have an "apron" on them (which here is just a 1-2 inch curb to keep the crap they put on the roads in the winter here from poring into a downhill driveway.)

Also what do u do about steep ROADS, rough pavement, road construction, potholes, or speed bumps/humps? I don't see how it would even be possible to drive a car like that in my area!

Like the wheels/system though.
A little lowering is OK if it's Stiff enough, but You're RIGHT. THAT'S NOT a STEEP Driveway!!!!
That poor car has been Modded out of the realm of usability.
Nice job w/ the boards, but what a PITA to have to do that w/ any frequency!
Image
 
Discussion starter · #14 ·
yeah that was just a one time thing. We needed to put his system in and it was going to rain so we wanted it in the garage. It was either the boards or take the front bumper off. We chose the lesser of 2 evils!!
 
Discussion starter · #19 ·
Man perfect lowering!! Have you take off the springs?
Image
Very nice car, and nice job with the ICE!
Image
thanks alot man!f it sure does look like we took the whole suspension off doesn't it???
Image
Image
Image


thanks for the compliments on the system. It is really nice for Derrick to have his trunk back!!!
Image
 
Re: How do you get a lowered foci in a steep drive

after looking at the other pix of your driveway, i think you should move.
I second that.
Image

NICE WORK!
Image
 
1 - 20 of 20 Posts