tranny

David Anderson · Oct 4, 2003

Guys. Im looking for a way to say...make my zx2 shift harder and faster. A chip will not work right with my car. I was thinking of pulling the ECU, putting a 5spd SR ecu in. Getting manual valve bodys, would this allow for full manual shifting along with my improved shifts. I will talk with a reputable shop later this week if this sounds feasable

daveyfx · Oct 4, 2003

So you're dealing with a ZX2? Sounds like it's an automatic too. If that's the case, the S/R PCM will only work on the 5 speed gearbox. Superchips and DiabloSport have a chip application for literally every 5 speed and automatic program in existence for the ZX2. Perhaps a dealer from this forum can even point you in the right direction.

dave

daveyfx · Oct 4, 2003

By the way, you might want to head on over to http://forum.teamzx2.com to get some more help/advice on your ZX2 needs

David Anderson · Oct 4, 2003

I understand what the SR pcm is for. Thats my entire purpose. If I get a tranny shop to somhow make the tranny non electroinic (i had a friend explain it) it will benefit my a little more. And no, a chip does NOT work with my code. I went to a members house and we tried a few different burns with my car. It acted VERY VERY strange.

So you're dealing with a ZX2? Sounds like it's an automatic too. If that's the case, the S/R PCM will only work on the 5 speed gearbox. Superchips and DiabloSport have a chip application for literally every 5 speed and automatic program in existence for the ZX2. Perhaps a dealer from this forum can even point you in the right direction.

dave

ZincSR · Oct 4, 2003

there is a shift kit u can make for the atx, but u might save money to get the FR pcm the s/r pcm is hard to find and kinda pricy from some people, what yr is your zx2 and whats the code?

zx3focusguy · Oct 4, 2003

????

I think you may have problems somewhare. No reason you shouldn't be able to do a chip for that car.
Also, if you go wiht a 5spd ECm, your speed sensor won't work. Plus, I believe the wiring harness is a good bit different. Seems to me like it would be a lot of time and money not knowing if it will even work.

David Anderson · Oct 4, 2003

Ill check later on my code. its a 02. I went to Cajuns house and we tried numerous burns..we did my zx3 perfect, but my zx2 is a bitch

there is a shift kit u can make for the atx, but u might save money to get the FR pcm the s/r pcm is hard to find and kinda pricy from some people, what yr is your zx2 and whats the code?

ZincSR · Oct 4, 2003

are you taking the vct into acct? i've never heared of an un-chipable code

tranny

David Anderson

daveyfx

daveyfx

David Anderson

ZincSR

zx3focusguy

David Anderson

ZincSR

Top Contributors this Month

Recommended Communities