Hello, I was wondering if anyone has put Eibach springs on there 2005? And if so, is it hard? or is it like the all the other foci? If anyone can let me know or help me out I would greatly appreciate it. I'm gonna buy some Eibach sportlines soon, yet needed some help/info. etc. Thanks!
Installing Eibach springs on a 2005 focus
danimal
1 - 11 of 11 Posts
Hello, I was wondering if anyone has put Eibach springs on there 2005? And if so, is it hard? or is it like the all the other foci? If anyone can let me know or help me out I would greatly appreciate it. I'm gonna buy some Eibach sportlines soon, yet needed some help/info. etc. Thanks!
Joined
·
8,343 Posts
This belongs in Suspension, not Duratec Tuning.
An answer to the original question is, they are not hard to put in. I installed the springs in my '05 ZX3 in about an hour. I am lucky because I had a lift to use as well as air tools. But, if you have done suspension before, I don't see it taking any more than 3 hours even with basic hand tools and jack stands. The good part is it is an '05 so taking things apart will be a breeze. If you live in an environment that uses a lot of salt during the winter season, I would recommend using a little anti-seize when putting things back together.
![Image]()
Joined
·
2,146 Posts
uhh they didnt make an 04 with a zx4 badge that on the 05 its sedan setup what your refering to and there is no reason any 04 or earlier suspention wont for on an 05 the only thing that changed in 05 was sheetmetal and engine avalability in certian models, oh and the se and s lack a rear sway bar the SES and ST(or SES with verve!) have the rear sway and can hence be changed all suspentions work fine I have an FK35/40 off of a 2001 ZX3 and mines an 05 ZX3 so im prety sure they all work
my bad
your right I bought the one that said for a 2004 sedan. I think they told me the rear sway bar wouldn't fit. now I am assumeing the one that(focus central )tried it on may not have had a swaybar from the factory. so it would just be lacking the bushing holders.
your right I bought the one that said for a 2004 sedan. I think they told me the rear sway bar wouldn't fit. now I am assumeing the one that(focus central )tried it on may not have had a swaybar from the factory. so it would just be lacking the bushing holders.
1 - 11 of 11 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
