Ford Focus Forum banner
Cancel
Create thread New Garage Forums

Fiestas @ SEMA

Jump to Latest
41 - 60 of 68 Posts
#41 ·
I like the wheel change on the focussport one

I'm guessing most of the FSwerks parts are still in development. I think the exhaust would have looked better with a single oval tip, but then again I only have a few pics to go off of.
 
#42 ·
SVT3658 said:
IMO the exhaust looks funky. Like it either needs a cutout done so it comes straight out, or stick with turndown tips. It being at a downward angle makes it look kinda like it was tacked on to me. I love the car as a whole though, it looks GREAT
Click to expand...
Johnny_P said:
I like the wheel change on the focussport one

I'm guessing most of the FSwerks parts are still in development. I think the exhaust would have looked better with a single oval tip, but then again I only have a few pics to go off of.
Click to expand...

Dont forget the FSWERKS system is a prototype and will be adjusted slightly for a more straight outward tip instead of how it's pointing downwards. Secondly there may be a second tip option when the production unit is completed. That will all be sorted out in the future.


Thanks,
Vik
 
Save
Reply Quote Like Like
#43 ·
Take your time Vik,
I found out today that my job is going to Mexico, so I won't be in a hurry to buy Fiesta parts. :( Hopefully things will be back to normal by spring and I can still go ahead with some FSWerks Fiesta goodies.
 
#44 ·
BRZX3R said:
Take your time Vik,
I found out today that my job is going to Mexico, so I won't be in a hurry to buy Fiesta parts. :( Hopefully things will be back to normal by spring and I can still go ahead with some FSWerks Fiesta goodies.
Click to expand...
That sucks, man. Hang in there and remember you're not alone. Millions of Americans in the same freaking mess.
 
#45 ·
adamw said:
What do you guys think about painting the rear diffuser to match the body? The white one had that, but broken by the green accent.

How do you thing that car would look with 18 inch TD Monzas? Like it was ready for the Monte Carlo rally?
Click to expand...
A painted rear piece might look OK. I wanted to showcase the 3dCarbon body kit the way that it's sold normally so it was left the way we have it pictured in this thread.

As for the wheels, that's all personal choice. I like to see some lip on most of the SEMA cars we build, but there are some nice exceptions, of course. :cool:
 
#47 ·
Z63R said:
This is a great page of Fiesta pics. :thumbup:

The FS Werks' version is of course the cleanest, and that last-minute wheel swap was cho-yce!

Since I'd neither be able to afford such a set-O-wheels and would definately not like cleaning brake dust from the megaspokage, what would the bronze 12-spoke wheels that 3d carbon had on their car look on the silver car?

Image


:D
Click to expand...
Thank you, kind sir. :bows:

The wheels aren't THAT expensive. :D
 
#56 ·
mbell75 said:
Me too...and then I remember it only has 118hp :lol: Going to wait and hope the ST comes out. If not, maybe FSWerks will have a turbo kit out for it in a year and I can ignore the fact its a 5 door.
Click to expand...
but after hearing that FSWERKS exhaust, I think I'd be OK with the low horse power.

I'd like to know how much FSWERKS is going to sell me that car for.:D

JK, I'm kind of broke. But I would like to know the specifics on this car, what kind of suspension was used and how much it is.
 
#60 ·
Guess I'm in the minority; I don't like any of these. In my opinion, the car built by FSWorks for last year's show looks much nicer, and the Ford Racing wheels that were on the Steeda car last year look nicer than any of these.
 
Save
Reply Quote Like Like
41 - 60 of 68 Posts
About this Discussion
67 Replies
33 Participants
Last post:
tallguy2.3
Ford Focus Forum
posts
3.6M
members
67K
Since
1989
Forum community dedicated to Ford Focus owners and enthusiasts. Come join the discussion about RS/ST performance, modifications, troubleshooting, maintenance, and more!
Full Forum Listing
Explore Our Forums
TEAM Pit Stop Ford SVT Focus Headquarters Forced Induction & Nitrous MK I Tech New Member Introductions