Ford Focus Forum banner
Cancel
Create thread New Garage Forums

SVT Parts! Brake Misc parts :) PLease read

Jump to Latest
1 - 18 of 18 Posts
T

turntablez

· Registered
Joined
·
51 Posts
Discussion starter · #1 ·
I was wondering if anyone can help me out on the following parts. I need these to finish a rear brake SVT upgrade for my Focus. So the sooner I find the parts...the better.

I need one rear SVT ABS sensor.

I need the 2 rear brake brakets. Here is the pics and parts numbers. These are like 5 buck on the net...but I'd rather get them from someone one here.

YS4Z-2082-EB
YS4Z-2082-FB

Image


I also need an SVT rear passenger side spindle. The part number:

98AZ-4A013-AA

Image



Last I need a Rear Hub/Bearing Assembly.

YS4Z-1A034-AA

Image


Please PM me or Reply here. Thanks everyone!

Todd[/QUOTE]
 
Discussion starter · #4 ·
jonny.burns.g1 said:
I also have one bracket, I personally just didnt use the bracket and used a stainless line and made an aluminum bracket.
Click to expand...
Hmmmm howmuch does an abs ring cost? So you mean there is no bearing in it? Cause I thought the ring was in the actual bearing? much is the much for the hub/bearing assembly? Is it in good condition? How much for the braket and what side is it? Drivers or passengers? Both will be shipped to 48089. Thanks!
 
Discussion starter · #6 ·
lapp4sm said:
The ABS ring is not part of the hub or bearing. It presses onto the hub. The front bearing is the ABS tone ring. Tousley Ford sells them for around $30.
Click to expand...
So what your saying is the part I will have to order is:

ABS tone rings 5S4Z-2B384-AA

Correct?

jonny.burns.g1 said:
I have a used hub/bearing assembly if you want? does not inlcude abs ring though. I would replace those anyways and I have the abs sensor too.
Click to expand...
So it does come with the bearing? If so how much for the bracket and the Hub/Breaing assembly? WHat side is the braket for? Driver or Passenger?
 
Discussion starter · #7 ·
@lapp4sm is the ring sensor the same for cars that come with drums? I just recently had my passenger side drum ring sensor replaced. So I could possibly pop it out of the drum and into the SVT upgrade????
 
#8 ·
Ill sell you the hub and bearing for 25? the bracket for a buck I think its the driver? i cant remember. and the sensor for 10 bucks, plus shipping of course. both sensors work fine I could give them both to you for 15 if you want to make sure. I have to go to my dads house and make sure the hub and bearing are not completely destroyed from when I removed it. The water seal is kind of hard not to destroy imo. I suggest buying anything you need from steve at tousley though, he's pretty much the most knowledgeable guy I've spoken too in recent memory about our cars when it comes to swapping this kit on. He knows like everything.
 
Discussion starter · #9 ·
jonny.burns.g1 said:
Ill sell you the hub and bearing for 25? the bracket for a buck I think its the driver? i cant remember. and the sensor for 10 bucks, plus shipping of course. both sensors work fine I could give them both to you for 15 if you want to make sure. I have to go to my dads house and make sure the hub and bearing are not completely destroyed from when I removed it. The water seal is kind of hard not to destroy imo. I suggest buying anything you need from steve at tousley though, he's pretty much the most knowledgeable guy I've spoken too in recent memory about our cars when it comes to swapping this kit on. He knows like everything.
Click to expand...
Ok. I will take the 2 Rear ABS sensors for $15. Ill just get the Hub/Bearing from Steve. Thanks for your help. You are very helpful :) PM me with your paypal email and shipping to 48089 and I'll send the money over. Thanks!

Todd
 
#12 ·
got the parts from my dads, im going to send you a hub too if it fits in the box I have no use for it... collecting dust. might save you a buck down the road who knows. pm me your address and ill pm you the paypal to send it too. im just doing a flat rate box usps if thats ok with you. saves money on shipping.
 
Discussion starter · #13 ·
jonny.burns.g1 said:
got the parts from my dads, im going to send you a hub too if it fits in the box I have no use for it... collecting dust. might save you a buck down the road who knows. pm me your address and ill pm you the paypal to send it too. im just doing a flat rate box usps if thats ok with you. saves money on shipping.
Click to expand...

PM sent :) Thanks!! USPS has 5 dollar flat rate shipping for up to 50 pounds. You may wanna check it out :) Oops....as im typing I see your ahead of me on that....lol Thank you!

Todd
 
Discussion starter · #17 ·
jonny.burns.g1 said:
got the parts from my dads, im going to send you a hub too if it fits in the box I have no use for it... collecting dust. might save you a buck down the road who knows. pm me your address and ill pm you the paypal to send it too. im just doing a flat rate box usps if thats ok with you. saves money on shipping.
Click to expand...
Thanks again...I got the sensors las night :) Still looking for the rest!
 
1 - 18 of 18 Posts
About this Discussion
17 Replies
3 Participants
Last post:
turntablez
Ford Focus Forum
posts
3.6M
members
67K
Since
1989
Forum community dedicated to Ford Focus owners and enthusiasts. Come join the discussion about RS/ST performance, modifications, troubleshooting, maintenance, and more!
Full Forum Listing
Explore Our Forums
TEAM Pit Stop Ford SVT Focus Headquarters Forced Induction & Nitrous MK I Tech New Member Introductions