Ford Focus Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
474 Posts
Along this same line, how can I tell if the DSI is shifting? I've never been able to tell, and think this would be valid information for this post.
thanks
Simple test:

First, gain access to the motor (remove the fender liner, bumper, etc.) You will see a plug on top of the box (in front of drivers front tire, BTW). In there is a harness with I beleive 5 wires. A green/ white, white/ red and two black/ whites. The fifth wire is white/black I THINK. Just narrow it down tot he last wire.

Turn the ignition on (do not start the car), and put one end of a wire to ground, strip the 5th wire and touch the ground wire to copper. you will hear the cable move.

I did this when I was playing with my DSI controller...
 
1 - 1 of 1 Posts
Top