These are pics of a 2008 focus we recently put together for the bosses wife. The modifications include custom paint & pin striping, tinted head and tail lights, custom billet grille, shaved tailgate and tinted windows.This car has every option accept sunroof and leather.
![Image]()
We tinted the headlights but they came out a little dark. We will be adding an HID kit to it hopefully they will brighten up sum.I would recommend not tinting the lights so much or not the entire light.
![Image]()
This is the custom billet grille I created for the car. Since there is no billet grille that replaces the chrome factory grille we came up with this one.
![Image]()
This grille is actually for a ford fusion. The top six bares were cut from the top of the grille and shortened by 3 to 4 inches on each side to fit in between the headlights. I had to retain the the factory lower portion of the grille witch was cut off with a sawsall and screwed to the bumper with two self tapping screws.
![Image]()
I bent up some aluminum strap that I secured to the rad support with more self tapping screws.I then screwed two brackets to my aluminum that came with the grille kit.The grille was then screwed to those brackets in the two remaining grille attachment points.It is held in a lot stronger than I imagined.
![Image]()
![Image]()
Here is a rear shot of the car we shaved the emblem and key hole.The taillights and trunk light came out great and they are easy to see day or night.
![Image]()
Here is a close up of the paint and pin stripe although the car got a bit dusty right after I washed it. All the custom paint is only visible in direct sun light and hardly noticeable without the sun like a ghost effect. The car looks completely black at night. Future plans for the car include a body kit (3D Carbon),different wheels and maybe lowering springs.Hope you people like the car.
![Image]()
We tinted the headlights but they came out a little dark. We will be adding an HID kit to it hopefully they will brighten up sum.I would recommend not tinting the lights so much or not the entire light.
This is the custom billet grille I created for the car. Since there is no billet grille that replaces the chrome factory grille we came up with this one.
This grille is actually for a ford fusion. The top six bares were cut from the top of the grille and shortened by 3 to 4 inches on each side to fit in between the headlights. I had to retain the the factory lower portion of the grille witch was cut off with a sawsall and screwed to the bumper with two self tapping screws.
I bent up some aluminum strap that I secured to the rad support with more self tapping screws.I then screwed two brackets to my aluminum that came with the grille kit.The grille was then screwed to those brackets in the two remaining grille attachment points.It is held in a lot stronger than I imagined.
Here is a rear shot of the car we shaved the emblem and key hole.The taillights and trunk light came out great and they are easy to see day or night.
Here is a close up of the paint and pin stripe although the car got a bit dusty right after I washed it. All the custom paint is only visible in direct sun light and hardly noticeable without the sun like a ghost effect. The car looks completely black at night. Future plans for the car include a body kit (3D Carbon),different wheels and maybe lowering springs.Hope you people like the car.
