Joined
·
1,330 Posts
I looked into this about 5 years ago. There are a couple of companies that make plates that you can mount the motor to the frame with. The plates bolt to the motor behind the water pump and then goes straight out to the frame rail.
I know that Hot Rod Magazine did an article on it around that time. I am sorry I can't remember the companies name. I believe that it started with an A. Do some google searches for the swap you should be able to come up with something.
Andrew
I know that Hot Rod Magazine did an article on it around that time. I am sorry I can't remember the companies name. I believe that it started with an A. Do some google searches for the swap you should be able to come up with something.
Andrew
