Ford Focus Forum banner
1 - 16 of 16 Posts

·
Registered
Joined
·
859 Posts
I know responses starting with a question can be aggravating. So here goes.
Anyway, what you need is a idler pulley for the Duratec Focuses w/o AC and belt.
Pulley part# - 2N1Z-8678-BD and belt part# - 4S4Z-8620-FA (2.0L Duraterc w/ cali. emissions); or 4S4Z-8620-DB (2.0L Duratec non cali. emmissions).
If you have the 2.3L, you wil need belt part# 3S4Z-8620-BB.
Good luck, and always purchase your Ford/Motorcraft parts from Tousley Ford in White Bear, MN (ask for Steve).
 

·
Registered
Joined
·
60 Posts
Good luck, and always purchase your Ford/Motorcraft parts from Tousley Ford in White Bear, MN (ask for Steve).
Terra Firma on the turboranger boards blows Tousley out of the water. Ask AJS he buys from him all the time.

2N1Z-8678-BD 15.55

4S4Z-8620-DB 19.65
4S4Z-8620-FA 25.62
3S4Z-8620-BB 29.62
 

·
Registered
Joined
·
328 Posts
Discussion Starter · #4 ·
I know responses starting with a question can be aggravating. So here goes.
Anyway, what you need is a idler pulley for the Duratec Focuses w/o AC and belt.
Pulley part# - 2N1Z-8678-BD and belt part# - 4S4Z-8620-FA (2.0L Duraterc w/ cali. emissions); or 4S4Z-8620-DB (2.0L Duratec non cali. emmissions).
If you have the 2.3L, you wil need belt part# 3S4Z-8620-BB.
Good luck, and always purchase your Ford/Motorcraft parts from Tousley Ford in White Bear, MN (ask for Steve).
anyway i can get a price on those parts?
 

·
Registered
Joined
·
101 Posts
can't remember exactly how much my delete cost, but i remember the pulley was pricier than i anticipated... 80 bucks-ish

still not too bad and the whole delete saves you 50lbs or so
 

·
I change diapers now
Joined
·
14,444 Posts
Bump for posterity.
 

·
Premium Member
Joined
·
12,444 Posts
I know responses starting with a question can be aggravating. So here goes.
Anyway, what you need is a idler pulley for the Duratec Focuses w/o AC and belt.
Pulley part# - 2N1Z-8678-BD and belt part# - 4S4Z-8620-FA (2.0L Duraterc w/ cali. emissions); or 4S4Z-8620-DB (2.0L Duratec non cali. emmissions).
If you have the 2.3L, you wil need belt part# 3S4Z-8620-BB.
Good luck, and always purchase your Ford/Motorcraft parts from Tousley Ford in White Bear, MN (ask for Steve).
Psst, over here. I moved. :)

http://www.tascaparts.com/oe-ford/2n1z8678bd?search_str=2N1Z-8678-BD

http://www.tascaparts.com/oe-ford/4s4z8620fa?search_str=4S4Z-8620-FA

http://www.tascaparts.com/oe-ford/4s4z8620db?search_str=4S4Z-8620-DB

http://www.tascaparts.com/oe-ford/3s4z8620bb?search_str=3S4Z-8620-BB
 

·
Registered
Joined
·
36 Posts
FYI that is a 2.3L Fusion block too. No really difference other then the Crank position sensor... Sorry I forgot to mention that. But the same idea.
 
1 - 16 of 16 Posts
Top