Ford Focus Forum banner

1 - 11 of 11 Posts

·
Registered
Joined
·
432 Posts
Discussion Starter #1
I am getting the Xenon front bumper put on...need new driving lights...

1. Which are the Tightest(looking) & Brightest driving lights that are under $200?

and the bumper is at the shop...duffuss here forgot to measure!!!

2. Anyone have the dimensions of the driving light holes for the full Xenon bumper?

3. Which ever ones I get, will I be able to use the stock wires for the stock D-Lights? (ie, use stock headlight switch!!!!)

Sugestions, PL>S!
THANKS!!!!


EDIT...Final results...me likey!!!
 

·
Registered
Joined
·
244 Posts
Re: AfterMrkt - Driving Lights...Questions

I think those would look pretty good! Just get them centered so they look good in the bumper.
 

·
Registered
Joined
·
6,779 Posts
Re: AfterMrkt - Driving Lights...Questions

Good choice, nice lights. I would set them as far apart as possible in the bumper holes. I just think they look alot better spaced apart.
You dont even have to use the light kit it comes with. Just slice in the wires for these to the stock harness.
 

·
Registered
Joined
·
432 Posts
Discussion Starter #6
Re: AfterMrkt - Driving Lights...Questions

Good choice, nice lights. I would set them as far apart as possible in the bumper holes. I just think they look alot better spaced apart.
You dont even have to use the light kit it comes with. Just slice in the wires for these to the stock harness.
Bought them!!!


I can really just splice da wires? So, I guess the stock Driving lights were also 55w?

Can anyone else also confirm this for me? cuz...nothing has ever been THAT easy, LOL!!

THANKS
 

·
Registered
Joined
·
12,245 Posts
Re: AfterMrkt - Driving Lights...Questions

NO!

do not just splice into the stock wiring.

stock zx3 fogs are type 893 37.5 watts
stock svts fogs are type H10 and 42watts.

Your going to need to wire them as per the instruction, using some relays to make sure you don't start melting your stock wiring and blowing stock fuses.
 

·
Registered
Joined
·
432 Posts
Discussion Starter #8
Re: AfterMrkt - Driving Lights...Questions

NO!

do not just splice into the stock wiring.

stock zx3 fogs are type 893 37.5 watts
stock svts fogs are type H10 and 42watts.

Your going to need to wire them as per the instruction, using some relays to make sure you don't start melting your stock wiring and blowing stock fuses.
Sweet...thanks!! I though that was too good to be true!!


And the wiring comes PRE-ASSEBLED!! whOOt!


Should get my car back from shop FRiday!! Can't Wait!!

Thanks Again!!
 

·
Registered
Joined
·
4,476 Posts
Re: AfterMrkt - Driving Lights...Questions

i would get fog light instead of driving light..
driving light will give straight pencil looking beam..
fog light will brighten the road when cornering..
 

·
Registered
Joined
·
432 Posts
Discussion Starter #10
Check the photo in first post...I like them...alot!
 
1 - 11 of 11 Posts
Top