Ford Focus Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
3,022 Posts
Discussion Starter #1
VCT sensor? It makes no sense for these cams even have any provisions for a VCT sensor, especially since no Focus has it (with the exception of the SVT, but these cams have been out long before then). The only thing I could think of is the ZX2, but the VCT on the ZX2 is on the exhaust cam.
 

·
Registered
Joined
·
3,022 Posts
Discussion Starter #4
Maybe I missed it, but I was taking a look at my cams and neither one is labelled intake or exhaust. I'm pretty sure I read somewhere the one with the blue paint is the exhaust cam. Any idea?
 

·
Registered
Joined
·
5,580 Posts
on the side where the notches r 4 the cam alignment tool...look next 2 the last journal and find the 1 w/a 'bump' on it....that is the intake, and that bump is 4 the vct sensor, which of course in our cars is not used.

-Ult
 

·
Registered
Joined
·
222 Posts
when i got mine the exhaust cam had a white mark on it.
 

·
Registered
Joined
·
299 Posts
Forget about the paint, look for the lug..... Only the intake has it.
 
1 - 8 of 8 Posts
Top