Ford Focus Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
647 Posts
Discussion Starter #1
ok have a few questions, i have the fc stg2 head in my floor and a pro-flow( dont know what its calobrated for) and i have some 24lbs injectors coming in, so this is what i need to know will i have to get a chip to read for the injectors and the head unit or can i just slap on and play?
 

·
Registered
Joined
·
1,649 Posts
you're definately gonna need a chip for the injectors/pro flow combo... the head you could probably ge away with, but add the injectors and 70mm and without a chip... Zetec go BOOM!!
 

·
Registered
Joined
·
1,649 Posts
yes, it'll need a custom burn.

you can get an order form for custom diablo chips here:

Diablosport Chip Custom Burn Request Form

I got that from the PDQ Performance website, but that is the same sheet that all others use.. they just have all their own junk tacked to it.

just fill out the car specs parts and then fax it to the guys at McNews and they can get it ordered for you cheaper than diablo direct.

it's like $225ish for the chip, then $125 for the custom program. Just be forewarned, you may need a few attempts at the program to get it right. Easy access to a dyno with A/F is definately a plus

p.s. sorry for the late response

[ 02-23-2003, 08:53 PM: Message edited by: TooleBox ]
 
1 - 5 of 5 Posts
Top