Ford Focus Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
148 Posts
Discussion Starter #1
The standard cams have no locating pin like the Crowers, I had to drill my cam gears to accept the crowers. This was easily done, I however battled to line the cams up. So I sloted the locating pin on the Exhaust cam.

When I first installed them the Power gain was very low till I got the alignment corect now the well work the R3800 I spent.

Just to note If the locating pin is not there effectivly you can use the standard cam gears and adjust the cam timming.
 
1 - 1 of 1 Posts
Top