Focus mk 1 & mk2 Billet Front hubs - an improvement over the stock parts - need any?

Focus mk 1 & mk2 Billet Front hubs - an improvement over the stock parts - need any?

As I mentioned in the Super Hubs thread, there are 2 suppliers that have built aftermarket billet front hubs for the mk1 and mk2 cars.
I've done a lot of research on the front hub issues, both here, on the FF forum, and at the race track, having witnessed at least 4 Focus teams that experienced front hub failures. I wasn't lucky enough to obtain a set from Golis Machine, the maker of the Super Hubs, because there were none available when I needed them 2-3 years back.
Golis (Will) makes a great product, and he in fact emailed me when he made a subsequent run of parts last year. I would have bought from him if the timing had worked out. However, I have sent 3 teams in his direction that bought hubs from Golis when Will made that latest run of parts last summer.

In early 2016, my research found another racer who contracted another shop to build him billet front hubs a few years back. We went in together and bought more hubs in Spring 2016. I've recently been approached by other racers who now want these hubs. Since I've worked with my supplier before, and know that there are at least 10 sets of their hubs out there with no reported failures, I am again working with that supplier.

I don't post here often, and can't post pictures until I get 25 post counts, so as I did with Chukker, please PM me your email address and/or phone number, and I will share pictures, pricing, material spec information, or answer any other questions you might have.

For Chukker, we are making the hubs to his specs, in a 5x114.3mm bolt pattern with increased hub face O.D. to account for the larger bolt circle - all at no additional charge! Pricing on these hubs is $600/pair which includes ARP long studs and cadmium plating.

best regards,
Mike Coppola