Depending on the driver anywhere between 16.5-17 seconds. I belive they are listed as being 16.7 or 16.8 by most auto mags.

Nate

Wrong forum BTW

 

Sorry man im kinda new to the forums.

 

Sorry man im kinda new to the forums.

It's all good, just an FYI.

There is a drag racing forum here: http://www.focaljet.com/ubbthreads/postlist.php?Cat=0&Board=UBB61

Welcome to the 'jet!

 

i think all zx3 are going to get difrent times,like on a dyno they would't all get 130 hp or 100 whp.bouth in average they would be around there.also depends of how much you weight (no offence),good driver... specially in the 60ft.most people say 16.5 to 16.8 and a 60ft of 2.3 with stock tire or any street tires,but i was never able to hit that not even with my mods that are not much as you can see below.good luck! hope you do better than me..........

 

just for you to know i weight 200lb and got up to 81mph

 

If you get adjustable cam gears and tune them well it will help alot because one of the main reasons 1/4 mile times arent consistant from the factory is the loose tolerances in cam timing.

 

judging by your sn, i was thinking you were gonna post your time

 

i think all zx3 are going to get difrent times,like on a dyno they would't all get 130 hp or 100 whp.bouth in average they would be around there.also depends of how much you weight (no offence),good driver... specially in the 60ft.most people say 16.5 to 16.8 and a 60ft of 2.3 with stock tire or any street tires,but i was never able to hit that not even with my mods that are not much as you can see below.good luck! hope you do better than me..........

Why do you have a mil eliminator if you dont have a race header, unless you just dont have it listed?

 

i think all zx3 are going to get difrent times,like on a dyno they would't all get 130 hp or 100 whp.bouth in average they would be around there.also depends of how much you weight (no offence),good driver... specially in the 60ft.most people say 16.5 to 16.8 and a 60ft of 2.3 with stock tire or any street tires,but i was never able to hit that not even with my mods that are not much as you can see below.good luck! hope you do better than me..........

Why do you have a mil eliminator if you dont have a race header, unless you just dont have it listed?

From his thread in Zetec Tuning:

so what hapends if i put in the mil without installing the header. will it be any side effect (good or bad)?

He has a race header, but it's not installed.

Nate

 

went 16.19 in mine stock b4 i did something. not 2 many run stock having not done anything.

-Ult

 

thanks bmorezx3 for answering for me but yes his right i do have a header ,but i'm waiting for flex an cat back to come in.