[Bugs1066]

After two days and 120mi here's my experience
with it: Performance wise the improvement is equal
to what my 65mm t/b did for my Focus.So far the
only down side is when coming to a stop,the rpms
lag at 1400rpms for 4 or 5 seconds before settling
at my cars normal 900ish rpms.
Just thought i'd share.

 

[FociD00d02]

what exactly is this ?

 

[Bugs1066]

A one inch think plate that go's between T/B and
intake manifold.

 

[ENZI]

Originally posted by Bugs1066:
After two days and 120mi here's my experience
with it: Performance wise the improvement is equal
to what my 65mm t/b did for my Focus.So far the
only down side is when coming to a stop,the rpms
lag at 1400rpms for 4 or 5 seconds before settling
at my cars normal 900ish rpms.
Just thought i'd share.

<font size="2" face="Verdana, Arial">Any ideas on what is causing the rpms to hang up like that?

[ 03-10-2003, 01:08 AM: Message edited by: ENZI ]

 

[Bugs1066]

The revs started hanging after the Helix install.
I looked over everything today and it seems ok.
But with the way the cars running i can live
with the rev lag.

D.Turner

 

[JEEPers]

Check your throttle cable to make sure its not getting tackled or jammed. Rev your engine and have a friend observe the throttle as it returns to position.