Ford Focus Forum banner

HID help

727 Views 24 Replies 7 Participants Last post by  bluefociZX3
hey guys i just bought a HID kit and there is one problem. They are BI xenon so its a High low kit.. the low beam works. but once i click it to high the light does not come on. On the light there is one more wire IT IS the HIgh beam wire. What do i Connect that to to get the hi/lo beam to function.? any help is Great thanks guys
1 - 20 of 25 Posts
It would help alot to see a diagram of the HID wires.
in what housings are u using a bi-xenon kit in?!?!?!?!
See less See more
stock housing... i have teh inst in PDF how do i get them on here
wiring problem..
check the diagram that came with HId kit.
stock housing... i have teh inst in PDF how do i get them on here
Email me the PDF and I'll get them online...

[email protected]
email sent
2
Okay... I took screen shots of the diagrams that showed wiring...

If I missed one, tell me what page and what frame, also if you need any of the instructions posted.





Hope this helps...
See less See more
On AIM now with him, looks like a ground issue.
umm..you sure that is bi-xenon??i don;t see controller thing whoch looks either box or cylinder looking thing..

if it is controller built in somewhere, check the low/high wires..try switch low/high wires.
Its not bi-xenon really. Its a HID capsule with a halogen bulb stuck on it for the highs. Unfortunately with that setup it doesnt include the relay system hellas have that allow the highs and lows to stay on together when the highs are activated. So when hi activates the high the low will shutoff like normal operation. That means his ignitor will be firing alot more than it should.
I think the high should be left off as much as possible or youre looking at a short life.
2
oooooo aright, i was kinda nervous there for a second, i kno HID are bad in stock housings generally...but bi-xeonon would be insane


make sure the hi-beam mod isn't done, because you'll probably have a problem with melting of the harness/housing then


goodluck

-chris
See less See more
make sure the hi-beam mod isn't done, because you'll probably have a problem with melting of the harness/housing then.
Thats why I didnt suggest it.
See less See more
yeah it was a ground issue.. im sending them back, Im going to get probably the hellas Bi xenon kit. since thats what i org wanted
yeah it was a ground issue.. im sending them back, Im going to get probably the hellas Bi xenon kit. since thats what i org wanted
you should order some hella's along with it...believe me if you want to take advantage of all that light and not just get a cool color, u need a proper lense or housing

if you have been in a SVT/MACH focus, you'll kno what i mean..or any HID stock equipped car


-chris
See less See more
yeah i am confused on the Hella Bi xenon tho. is it a kit from hella or do i buy the hella headlights then the HId"s or what bc this is what i will get
my suggestion, if you are set on HID's..

buy MACHs/SVT euro headlights (HID)

and second choice..

Hella dual beams with their HID kit

neither are ment to have Bi-Xenon, but bro, you don't need bi-xenon once you see the ouput u get with HID's and the HI-beam mod done (where both highs/lows come on in hi-beam mode)

think bout it, its a safe and reliable choice

-chris
See less See more
str8 man.. there anyone sellin the Stock HIds, arnt they like 600 bucks? Im sendin my Hid kit back and usin that towards a real Nice setup like u suggested
str8 man.. there anyone sellin the Stock HIds, arnt they like 600 bucks?
~$500-600 for a set in like-new condition, but it's so worth it. It's like carrying daylight around, and it has a razor-sharp cutoff instead of that glare you get with ghetto setups.
See less See more
soo expensive
i gotta find some 1 sellin em and ill prolly buy em,
See less See more
1 - 20 of 25 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top