Re: Idle help
How long has it been doing it?
I would guess it's the idle air control valve first and the tps second.
How long has it been doing it?
I would guess it's the idle air control valve first and the tps second.
Idle help---I think I'm retarded
1 - 7 of 7 Posts
Re: Idle help
air leak around the TB gasket. get some carb cleaner and spray it around the base of the TB. do it slowly so if the engine revvs real hard, you know where the leak is. you may also have damaged the TPS. I've heard of it happening before though Im not sure how.
![]()
air leak around the TB gasket. get some carb cleaner and spray it around the base of the TB. do it slowly so if the engine revvs real hard, you know where the leak is. you may also have damaged the TPS. I've heard of it happening before though Im not sure how.
Re: Idle help
So I'm looking for where this stuff gets sucked in, right?
Hey, Gig, do you remember if I had to use some kind of gasket sealant or anything? I dont remember.
NM, I did a search, and managed to find this old thread
where I asked the same damned question! lmao
I think it just went away, so I didnt mess with it. I guess I'll be messing around in the garage saturday. Thanks for the responses, BOTH times
![]()
![]()
![]()
<-
![]()
Damn.air leak around the TB gasket. get some carb cleaner and spray it around the base of the TB. do it slowly so if the engine revvs real hard, you know where the leak is. you may also have damaged the TPS. I've heard of it happening before though Im not sure how.![]()
So I'm looking for where this stuff gets sucked in, right?
Hey, Gig, do you remember if I had to use some kind of gasket sealant or anything? I dont remember.
NM, I did a search, and managed to find this old thread
where I asked the same damned question! lmao
I think it just went away, so I didnt mess with it. I guess I'll be messing around in the garage saturday. Thanks for the responses, BOTH times
<-
4
Re: Idle help
I didn't use any sealant on mine, you will probably have to if you take the tb off cause the gasket might stick and rip.
Do what txfo mentioned, it's a good trick.
![]()
Yeah, I could have sworn I remembered someone having a problem like that in the past.
![]()
![]()
I didn't use any sealant on mine, you will probably have to if you take the tb off cause the gasket might stick and rip.
Do what txfo mentioned, it's a good trick.
Yeah, I could have sworn I remembered someone having a problem like that in the past.
3
1 - 7 of 7 Posts
