Ford Focus Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
3,350 Posts
Discussion Starter #1
To anyone who has self-ported their TB, what is the best "cutting" bit to use to grind out the plastic TB (a pic would be helpful)?

Many thanks!
 

·
Registered
Joined
·
5,620 Posts
it looks like a sanding drum, but smaller and its metal and is serrated.. actually it looks like the old style lawnmower blades...

use that and follow it up with a sanding drum..

go to either lowes or HD and look for it.. you will know it when you see it.

At least thats what I used.. (actually zetecwagon did it)
 

·
Registered
Joined
·
102 Posts
i used a dewalt drill with a sanding bit used for polishing brass.. worked really fast..
 

·
Registered
Joined
·
714 Posts
What Iceman said, or you could use a coarse sanding drum for the most part and finish up with a fine drum. Than some very fine sandpaper.
Good luck, and enjoy!


[ 02-04-2003, 12:56 AM: Message edited by: zetecwagon ]
 
1 - 4 of 4 Posts
Top