[Miked053]

Hey guys I was just wondering how many people have turbos (working) and where you got the kit or if it's custom. Just doing a little research

 

[sprout2287]

Aerocharger stage 3, Lidio tuned as of tomorrow morning.

 

[zx3focusguy]

Garrett .60 T-3, custom manifold, spearco bar and plate intercooler, mandrel bent pipeing. Turbonetics deltamark II wastegate, 5th injector for now.

 

[1turbofocus]

focus-power ZX3 kit 2000 Focus 440HP

focus-power SVT kit 2002 SVT Focus 292HP

Tom

 

[Welding Rod]

AC3, MIC, Safeguard, Aquamist, fulll exhaust

6PSI, 153 whp, 179 torque

Newest chip coming from Tom should allow 195+ whp and 225+ torque.

 

[crank0r]

SPI w/EXP manny
ihi-vj11
haltech e6k
35lb inj
and other internal crap...to much to list

 

[thestiffmister]

I will be building my own in this coming winter, T3/T4 HYBRID turbo, custom bent tubing, front mount intercooler, greddy wasegate and BOV.
45 LB injectors, fuel rail fuel pump and the Ford chip.
I will keep it posted with my progress. can't wait.

 

[Phiber]

I'm looking at a custom T3/T4 turbo setup.. Similar to an HKS one.. Probably get my exhaust manifold custom done, intake tubing custom bent, and then go fifth injector. MAF suxorz..

Everything probably for under 1500.. Not looking for huge hp first.. Probably 210 at the wheels, so no intercooler at first. ;D

 

[P-51]

Crankor, sweet escort! Nice blend of show AND go!

 

[BowDown]

Will be getting the focus-power kit to match my car in the focus-power banner

.

 

[crank0r]

Crankor, sweet escort! Nice blend of show AND go!

thanks

 

[zx3focusguy]

I'm looking at a custom T3/T4 turbo setup.. Similar to an HKS one.. Probably get my exhaust manifold custom done, intake tubing custom bent, and then go fifth injector. MAF suxorz..

Everything probably for under 1500.. Not looking for huge hp first.. Probably 210 at the wheels, so no intercooler at first. ;D

You sound like me when I put my kit togeather! Trust me, the $1,500 will come, and go...quick...very quick. I wouldn't expect 210 at the wheels from a non-intercooled setup. just my opinion. Good luck, keep us posted!

 

[Welding Rod]

LOL Focusguy - My 3K setup surpassed 6K and is still going... But I try not to think about it - thanks for reminding me.

 

[Phiber]

THAT's what I want.. Muahaha..

... wtf? It won't post!

 

[Bantha Fodder]

AC3 + MIC + Iceman + 3" exhaust. Also have water injection, but it isn't needed for daily driving.

 

[AtBlue5spZX3]

Imaginary turbo, with all the Imaginary turbo goodies.

 

[Penguini66]

ACII, SFMS, FC ORP, Borla, Panel filter, & DYI Manual Boost Controller set at 7psi. Everthing else stock. Always use 94 octane.

Haven't we done this before? Would it be worth it to make this a sticky to avoid it in the future?

 

[BowDown]

THAT's what I want.. Muahaha..

... wtf? It won't post!

What car is that?

 

[Phiber]

I believe that is the 2002 HKS Turb'd Elantra over in Korea. Their setups are so hooot.. Notice it's not intercooled, and it puts 210 to the wheels, I believe. The setup is the cleanest out there.. Probably going to copy their pipes and setup.. Just can't figure out what Manifold setup they are using. It's like, above where it's actually mounted, unless they have the pipes going up to the turbo?

Dunno

 

[BowDown]

I believe that is the 2002 HKS Turb'd Elantra over in Korea. Their setups are so hooot.. Notice it's not intercooled, and it puts 210 to the wheels, I believe. The setup is the cleanest out there.. Probably going to copy their pipes and setup.. Just can't figure out what Manifold setup they are using. It's like, above where it's actually mounted, unless they have the pipes going up to the turbo?

Dunno

Well the problem with that is... We dont have that much space in front of the motor... So I think you're going to have alot of fun setting that up.