Ford Focus Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
58 Posts
Discussion Starter · #1 ·
I have been doing some searching and found some answers but I still have a question. Before changing my suspension what else would I need beside the dampers and springs? If at all posible if any one has a pic of a strut bar on a SVT with a cool flow intake could you please post.

Thanx....
 

·
Registered
Joined
·
12,749 Posts
If you are changing out your stock springs and dampers, than you don't need anything else, other than your new springs and dampers.

Here's a pic of the Stress Bar with the Cool-Flo. It's from FocusSports website, but it's not on an SVT.
 

·
Registered
Joined
·
58 Posts
Discussion Starter · #3 ·
That was quick thanks.

Is it true that as long has I stay with the stock tires and only do a moderate drop I should not have any rubbing issues?
 

·
Registered
Joined
·
4,803 Posts
Yes, that's true. No rubbing issues with the stock rims and tires.
 

·
Registered
Joined
·
734 Posts
although you would probably need an alignment, and possibly a camber kit
 

·
Registered
Joined
·
1,859 Posts
I actually did not need an alignment on my 03 after the intrax install. Toe was within 0.4 of factory specs, camber was only off by 0.2degrees. Pretty strange I thought.
 
1 - 7 of 7 Posts
Top