Ford Focus Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
374 Posts
Discussion Starter #1
what I am looking for is the bumpstops that is actually on the shock itself in the rear, is this part sold seperatly or do you have to buy new shocks from ford to get this part, that reason why I ask is that in lowering my car I originally had the stock shocks on the car until they blew out I changed over to KW all around with h&r race springs and noticed that both of the bumpstops were worn/split badly, any info would help, thanks
 

·
Registered
Joined
·
374 Posts
Discussion Starter #2
no one?? i find it hard to believe that no one has had this problem
 

·
Registered
Joined
·
609 Posts
I know the pieces you are talking about, but I couldn't find a replacement for them. call your local area ford dealership. also, look and see if there is a part number for them on the piece.
 

·
Registered
Joined
·
455 Posts
Best thing I would tell you is go salvage. It may take a little looking, but it'll probably be the cheapest. I don't know if they come seperate or not. I would think they would be part of the whole shock. How long did you run the drop springs before the shocks wore out?
 

·
Registered
Joined
·
374 Posts
Discussion Starter #6
I ran the springs for about a year and a half(2.5" sca springs) on stocks before switching, another ? would be does koni provide new pieces because their diameter is larger(reason for boring out shock top) if so I might just wait for some konis
 

·
Inheritly Sinister
Joined
·
12,926 Posts
I ran the springs for about a year and a half(2.5" sca springs) on stocks before switching, another ? would be does koni provide new pieces because their diameter is larger(reason for boring out shock top) if so I might just wait for some konis
No, they do not. Well, I didn't get any with mine. Had to drill mine out.
 
1 - 8 of 8 Posts
Top