Ford Focus Forum banner

1 - 15 of 15 Posts

·
Registered
Joined
·
4,271 Posts
Discussion Starter #1
Well, here it is......
this was 15psi on 93 octane pump gas, cam gears and a custom intake manifold..

Its OK if you DROOL


 

·
Registered
Joined
·
12,749 Posts
Wow, this is with a GT28RS? The power profile resembles something with a tad bigger compressor.

Either way, very nice numbers! Congrats man! Now get that manifold repaird and enjoy the car!
 

·
Registered
Joined
·
4,271 Posts
Discussion Starter #3
We *think* the dips in the upper end are due to the Boost controller, that is a project for later.... now I just need to get the manifold shipped back for repairs..... BOOSTING this weekend
 

·
Registered
Joined
·
4,271 Posts
Discussion Starter #6
Actually its in the garage here at home


A crack developed in the Sheetmetal intake manifold on the way home, sending it back to Tom in the Morning for repairs... maybe too much boost???

WTF I cant believe I just said that


Seriously, it ran like a racecar until the crack.
 

·
Registered
Joined
·
2,181 Posts
Well, here it is......
this was 15psi on 93 octane pump gas, cam gears and a custom intake manifold..

Its OK if you DROOL
So everthing else is REALLY stock???

Oh yeah...congratufreakinlations, now get it to a track and show us a vid of whos in the rearview!!!


CCC
 

·
Registered
Joined
·
326 Posts
yum boost!
 

·
Registered
Joined
·
2,838 Posts
Stock SVT compression?
 

·
I change diapers now
Joined
·
14,444 Posts
Nice, hope you patch up that mani asap


Why is your TQ so low? You make awesome power and in a decent rpm band, but your tq just seems lacking. Is it the intake mani? What was your tq like with the stock mani?

- Drew
 

·
Dyno Queen
Joined
·
7,859 Posts
Nice, hope you patch up that mani asap


Why is your TQ so low? You make awesome power and in a decent rpm band, but your tq just seems lacking. Is it the intake mani? What was your tq like with the stock mani?

- Drew
My bet is a combination of the intake mani and I would guess that the turbo is a .86 hot side...
 

·
Registered
Joined
·
12,749 Posts
yes .86 A/R Turbine, Intake Mani, and Lack of VCT would be my guess.
I reviewed my dyno's and my torque definately has a different curve than his. Probably the same peak (being that we're both using the .86 A/R) but my ramp up looks like a hill, not a ramp. But my top end doesnt' touch his!
 

·
Registered
Joined
·
292 Posts
Actually its in the garage here at home

Seriously, it ran like a racecar until the crack.
Congrats dude. Hope everything comes out good.
 
1 - 15 of 15 Posts
Top