Ford Focus Forum banner

The B&M shifter LOWDOWN!!!!!

1073 Views 2 Replies 3 Participants Last post by  Modernceo
I spoke to Cory (Modernceo) tonight at Miami Subs and he told me that the B&M company has the SPI 5-spd. listed in there literature as a good fit......

So if B&M says OK then I would deem it OK myself.........

Besides HURST shifters......B&M is the second best to my knowledge!!!!

I would do it if I could!!!!!

Gabe Greene
2000 Ford Focus SE
Not so stock anymore!!!!
1st SPI w/a stress bar!!!
2nd SPI w/Cool-Flo!!!!
Fraternal Order of the SPI
4-DOA 4 Door Owners Association
TEAM Lonestar
"At my signal, unleash hell."
1 - 3 of 3 Posts
yups... looks like time to order me a shifter!! thanks red for your help!!


2000 Rainforest Green Sedan 5speed
Reactive Intake Filter
Focuz N1 type exhaust w/ 2.25in piping
Eibach Front Sway Bar
5in Autometer Monster Tach
Carbon Fiber Shift Knob
35% tint *all the way around*
1.8in Progress Sport Drop
WW Touring Wing
17in Konig Toxxins w/ 205/40/17 Faulkens *coming in hopefully this week*
EBC Green Stuff Brake Pads *installing w/ rims*
Pioneer/Kenwood/Polk Audio Soundsystem
16.7 1/4 ET @ 81.5 MPH
more to come...
See less See more
Terr Rex,

If worst comes to worst, please just keep all the packaging, and if you buy it from us, we will give you a full refund..

Cory Haines
Modern Performance
proud sponsors of
proud owners of project 00 focus kona

mods so far- Iceman intake, Thermal exhaust, Esslinger UDP, Magnecor wires JBA header,, Progress lowering springs and rear swaybar. Fiber Images carbon fiber hood, Corbeau Targa RS racing seats (pair) European grills and clear bumper lenses. Autometer dual gauge pod with carbon fiber A/F meter and carbon fiber boost pressure gauge, Piaa H4 supewhite bulbs and superwhite 55 watt fog light bulbs, Black carbon fiber dash kit
Many more top secret parts in the making / on order

Wanna see pics ? Click here-
See less See more
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.