Ford Focus Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
45 Posts
Discussion Starter #1
Does anyone know what size Torx I will need to replace the thermostat in my car? I believe there are three Torx screws, either T-15 or T-20. I have an '01 SE.
 

·
Devil's Advocate. Just to cheese you off.
Joined
·
6,880 Posts
http://www.focushacks.com/index.php?modid=59

Torx T-25

And you can get away with just un-doing some of those hoses and unscrewing the Torx screws, you don't need to remove the whole housing as shown in that article. That article is more made to address the faulty thermostat housing and gasket problem.
 
1 - 2 of 2 Posts
Top