Ford Focus Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
476 Posts
Discussion Starter #1
I have a question about my FIPK, with the stock box, the valve cover blow-by tube goes into the box and there is a filter there for the oil, well on the FIPK it goes into the middle of the tube. Were does it go from there? Does it go into the TB or does it go by the MAF and into the big round filter, granted that if oil gets on the MAF that is bad, and if it makes it to the TB that is also bad, which would be burning oil. Were does the blow-by oil go to?
 

·
Registered
Joined
·
1,310 Posts
you have the option of plugging the hole in your intake and adding a crankcase breather filter on to the end of the hose. this will eliminate any noxious gasses in your intake charge and give you a cleaner burn. id say its preference more then performance though.
 

·
Registered
Joined
·
2,945 Posts
Actually, that tube is there to provide air into the engine crankcase, not vent the crankcase into the air intake charge.

Putting a breather filter element on there is all you need.
 

·
Registered
Joined
·
476 Posts
Discussion Starter #5
bump
 
1 - 5 of 5 Posts
Top