Ford Focus Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
122 Posts
Discussion Starter · #1 ·
I am going to be putting a new motor in my ZTS and I was thinking about putting the WRC long block in my car but if the duratec 2.3 or 2.0 will bolt up, I might just buy the duratec. Because the duratec seems to have a stronger base and also seems to produce more hp with less done.

Any answers or comments would be appreciated.

Thanks in advance.
 

·
Don't Call Me Gaga!
Joined
·
30,267 Posts
Bingo. Same guts, different case. You'll need the MTX-75 from a Duratec car to do the swap. Make sure to remove that ungodly tall final drive first.
 

·
Registered
Joined
·
122 Posts
Discussion Starter · #4 ·
Wow thanks alot. Now the next thing is are all the motor mounts and the k frame the same? thanks for clearing up the trani question.
 

·
Registered
Joined
·
2,957 Posts
Re: Will the duratec 2.3 or 2.0 bolt up to the mtx

Wow thanks alot. Now the next thing is are all the motor mounts and the k frame the same? thanks for clearing up the trani question.
the mounts are in the same location but they are specific to the PZEV.
 
1 - 5 of 5 Posts
Top