I figured it was time to have a thread devoted to new parts coming in and just a fun way to show off the little changes that we make every now and then. Think of it as a mini Team Rigz. Have fun!
Team SR Build Threads
BlackZX3EvansAD
1 - 20 of 856 Posts
Joined
·
1,071 Posts
I figured it was time to have a thread devoted to new parts coming in and just a fun way to show off the little changes that we make every now and then. Think of it as a mini Team Rigz. Have fun!
Joined
·
1,071 Posts
I'll be the first to post in here. Here is the new Roush rear bumper that i got for super cheap off of their website.
![Image]()
Pics will be posted once i get it and then again when i paint it and install it.
Pics will be posted once i get it and then again when i paint it and install it.
Joined
·
4,019 Posts
Great idea Aaron 
Ill be the second to post here :lol:
![Image]()
+
![Image]()
=
A SVT bumper I plan on picking up today. For dirt cheap.
Ill be the second to post here :lol:
A SVT bumper I plan on picking up today. For dirt cheap.
Joined
·
10,319 Posts
Wheels I got. For dirt cheap. The guy even ave me a 5th rim to have as a spare
![Image]()
http://forums.focaljet.com/team-rigz/610112-impromptu-meets-ftw.html
http://forums.focaljet.com/team-rigz/610112-impromptu-meets-ftw.html
Joined
·
4,019 Posts
Joined
·
10,319 Posts
somebody local buy these!!
http://cgi.ebay.com/ebaymotors/Ford...hash=item19b4b9a5df&_trksid=p4506.c0.m245&_trkparms=65:12|39:1|72:1171|240:1318
They're in St. Cloud, which is really close to Orlando
http://cgi.ebay.com/ebaymotors/Ford...hash=item19b4b9a5df&_trksid=p4506.c0.m245&_trkparms=65:12|39:1|72:1171|240:1318
They're in St. Cloud, which is really close to Orlando
Joined
·
4,019 Posts
Joined
·
4,019 Posts
Joined
·
10,319 Posts
Ok all you need to say is:
You: Mom, there's this set of wheels for sale down in the Orlando area for 200 dollars. Brand new the wheels alone are about $1000, and these already have tires on them. And I could use new tires (make sure you put a few screws in the sidewalls of your car before you say this)
Your mom: OK, let's go
Problem solved. Oh and 4 rims will fit in the fofo no problem...with my spare rim I had 5 back there with no problems
You: Mom, there's this set of wheels for sale down in the Orlando area for 200 dollars. Brand new the wheels alone are about $1000, and these already have tires on them. And I could use new tires (make sure you put a few screws in the sidewalls of your car before you say this)
Your mom: OK, let's go
Problem solved. Oh and 4 rims will fit in the fofo no problem...with my spare rim I had 5 back there with no problems
Joined
·
4,019 Posts
HAHA. True, true. I do need some new wheels :lol: tho they might sit in the garage for a while :lol: . Ill let you know what goes down. How do you find this stuff
btw $184 with my 8% coupon :lol:
Joined
·
10,319 Posts
I find this **** because I don't have any more money. If I had more money I'd be driving down there tomorrow morning to pick buy them, but I iz broke
But whenever I have bank waiting to be spent, nothing ever comes up. The TDs were and EXTREMELY rare excetion to my apparent unluckiness :lol:
But whenever I have bank waiting to be spent, nothing ever comes up. The TDs were and EXTREMELY rare excetion to my apparent unluckiness :lol:
Joined
·
4,019 Posts
That sucks, but you should get them.I find this **** because I don't have any more money. If I had more money I'd be driving down there tomorrow morning to pick buy them, but I iz broke
But whenever I have bank waiting to be spent, nothing ever comes up. The TDs were and EXTREMELY rare excetion to my apparent unluckiness :lol:
Im not gonna steal em from you
but ssomeone placed a bet on them.. and my 8% coupon expires tomorrow ;o
Joined
·
1,071 Posts
Just preordered this from FSWerks. Well, actually my wife called since i am underway.
Duratec Engine Cover!!! Oh yes, it's friggin going down!
![Image]()
Duratec Engine Cover!!! Oh yes, it's friggin going down!
Joined
·
4,019 Posts
Walk into the club, its goin downn.
nice nice aaron.
your going way ahead of us now
good for you. :thumbup:
Joined
·
4,607 Posts
It's going down
A logical progression on the timeline
The separation narrowed down to a fine line
To blur the edges so they blend together properly
Take you on an audible odyssey
Now it's going down
I need to load some pics to Photobukits.
My engine is as assembled as it can possibly be. I wrapped the header halfway to protect the PCV can and sprayed it with black silicone protectant. The blower was dismantled, cleaned, had casting irregularities dressed, resealed and installed. All the accessories are hung and tightened. Every bolt, nut, screw, and fastener has been torqued to spec with blue lock tite in accordance with the Helm Focus manual or my own good judgement. The engine wiring harness is installed, fully wrapped and secured. The valves were about .002" out of lash beyond what I prefer so I bought oversize buckets and machined each one down until they all sit at .005"....nice and quiet. I opted to not reinstall WMI or the BAP and will be running essentially a stock a tune with modifications for displacement and compression. I expect about 250 WHP nothing more. Once I get back from Iraq it's going to be 400-450 WHP/ but that's another post....
The only thin I have left to do is install a new serpentine belt and a new brake booster hose. Apart from that, he bitch is ready to drop.
PS: Rick come weld a wideband O2 bung in my header.
A logical progression on the timeline
The separation narrowed down to a fine line
To blur the edges so they blend together properly
Take you on an audible odyssey
Now it's going down
I need to load some pics to Photobukits.
My engine is as assembled as it can possibly be. I wrapped the header halfway to protect the PCV can and sprayed it with black silicone protectant. The blower was dismantled, cleaned, had casting irregularities dressed, resealed and installed. All the accessories are hung and tightened. Every bolt, nut, screw, and fastener has been torqued to spec with blue lock tite in accordance with the Helm Focus manual or my own good judgement. The engine wiring harness is installed, fully wrapped and secured. The valves were about .002" out of lash beyond what I prefer so I bought oversize buckets and machined each one down until they all sit at .005"....nice and quiet. I opted to not reinstall WMI or the BAP and will be running essentially a stock a tune with modifications for displacement and compression. I expect about 250 WHP nothing more. Once I get back from Iraq it's going to be 400-450 WHP/ but that's another post....
The only thin I have left to do is install a new serpentine belt and a new brake booster hose. Apart from that, he bitch is ready to drop.
PS: Rick come weld a wideband O2 bung in my header.
Joined
·
663 Posts
A good parts link if you need them:
http://stores.shop.ebay.com/The-Ford-Focus-Parts-Store
The guys parting out 5 svt's including some EAP's.
http://stores.shop.ebay.com/The-Ford-Focus-Parts-Store
The guys parting out 5 svt's including some EAP's.
Joined
·
4,019 Posts
dude that is awesome!
edit: he is selling a set of wheels and tires for $500
ive found cheaper on ebay. :dunno:
1 - 20 of 856 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
