[LowZX3on17s]

I know ebay is cheap, anywhere else though? Thanks to anyone who responds with anything other than a smart ass comment about the beloved SEARCH button

 

[soybean311]

procarparts.com is the cheapest place i've seen for the clear bumpers. Focus's don't have Clear Corners because their headlight is only one lense. Your asking for Clear Bumpers. Procarparts.com

 

[jptech2004]

they are called clear corners because they are on the CORNER of the bumper. anyway, i got mine from modernperformance.com

 

[swift]

I would just get them from ebay its the cheapest.

 

[MikeyJA]

procarparts.com IS on ebay! they sell their products (atleast clear CORNERS) on ebay all the time. i got mine from procarparts on ebay because it is the exact same company just cheaper! hmm...order from their website and pay more OR use ebay and save a few bucks?!? its your choice...

 

[Affect]

they are called clear corners because they are on the CORNER of the bumper. anyway, i got mine from modernperformance.com

For a mere 40$

That's way too much.

 

[LowZX3on17s]

Thanks guys, have the procarparts.com lights leaked for any of you guys that have them? cuz the APC lights sure as hell do..

 

[C2Cab95]

LowZX3on17s - You have a private message.

 

[Nacron]

got these:
http://www.rsversion.com/details.asp?ProdID=1653

Sealed them up with silicon.

 

[Jibberish18]

anyone know how to prevent the APC's from getting water in them? I think the rest of the clear corners look ugly with the clear plastic and I'm shooting for APC. Should I just seal with silicone?

 

[krock]

Is it possible to get clear peices for the signals inside the front grill?

 

[E-rock]

Is it possible to get clear peices for the signals inside the front grill?

Possible? Yes, anything's possible. Actually I've seen it before somewhere on this site, but can't remember who has them. Some people are using VHT Niteshade on theirs to black them out. I may end up doing that also (unless I get new headlights w/turnsignals).

 

[jptech2004]

anyone know how to prevent the APC's from getting water in them? I think the rest of the clear corners look ugly with the clear plastic and I'm shooting for APC. Should I just seal with silicone?

I put some silicone around the edges of mine and it worked just fine.

 

[MMI-ZX3]

got these:
http://www.rsversion.com/details.asp?ProdID=1653

Sealed them up with silicon.

I have those and have never had a problem with leaking. Been on for quite a while now. Never had to add silicone either.

I had the ones that McNews sells and they leaked even with added silicone.

 

[Nacron]

got these:
http://www.rsversion.com/details.asp?ProdID=1653

Sealed them up with silicon.

I have those and have never had a problem with leaking. Been on for quite a while now. Never had to add silicone either.

I had the ones that McNews sells and they leaked even with added silicone.

better safe than fishtank