hmmm...

 

just one more part to add to my list I said I was going to stop after stage 2.. lol....

 

Thanks for the link. That will help when I install my Escape oil cooler.

 

I've done this already. While this is an easy mod I had to do some custom hose work... the only thing I dont like (not Cossie related) are the pinch clips holding the hoses on I switched most out to old fashioned hose clamps (the screw tight type). Just make sure you get the hoses the Cossie discription says it comes with. I never got 'em sent emails and couldnt wait any longer. I used the hoses from the heater core I took out which with some cutting worked beautifully for me. As of right now I have no pics but will try to post some when I get the chance. Any questions I'll do my best to answer them. Take Care

 

So this is using the coolant to cool the oil.
Does anyone know how much and where to get these....if they are out.

 

From what I understood they are not out yet.... so I am not sure where Spooky supposedly got his from.... and I am pretty sure they are going to be priced around $30.....

 

Found it on Cosworths site, but under a different part#.
Listed as (PR6630) for $35.71
Doesn't say anything about being not available though.

I'll be adding it to the list also.

 

I ordered mine from Focus Sport a while back when they first appeared on the Cossie web site when I first inquired about it with Ken, he said they were stiil working out some things in the kit to try back at a later time. When I spoke with him again he told me to call Focus Sport and order it through them which I did. At that time it cost $149. Wish I had waited for the $35 price. From Focus Sport its part # FSPR6630. Got it 10/28/05....

 

So does anyone have any pics of this installed?

Is it fairly well performing?

 

When I spoke with him again he told me to call Focus Sport and order it through them which I did. At that time it cost $149. Wish I had waited for the $35 price. From Focus Sport its part # FSPR6630. Got it 10/28/05....

Not to doubt you.... but I find that kind of odd since when I called FS they had no knowledge of it.... but oh well....

Any installed pics??? Have you noticed much of a performance difference??? Do you monitor your oil temps???

 

I just got an email from Cosworth stating:

KK3484 is a balance shaft delete kit.

The oil cooler kit is in stock
PR6630 Oil cooler Kit, Water to Oil type $149.00

So maybe FocusSport can get them.

 

The benefit of this unit is two fold, not only does it help cool the oil under heavy use, but it helps get the oil up to proper operating temp faster, reducing wear and increasing economy.

The only thing you have to worry about is overloading your cooling system on high powered cars. However, I don't think this is much of an issue.

 

$150 bucks makes the Escape one sound like a steal...

 

$150 bucks makes the Escape one sound like a steal...

Yeah. I think I might go that way also.
I priced the MS6 one and you don't want to know how much that peice cost.

 

Egz, do you have the part numbers for the required escape pieces? And what are the prices?

 

Is it safe to assume that it would work on the 2.0L?

 

http://forums.focaljet.com/duratec-tuning/493025-looking-dip-into-mazdaspeed-6-parts-bin.html
Scroll down a little ways...

3S7Z6881AA - Filter Adapter, MSRP=$55.93$, Online Price=$30.83
1S7Z6A642AAA - Oil Cooler, MSRP=$97.25, Online Price=$71.48

Now, I bought these a while ago, so I assume the numbers are still valid. The looked up just fine. I thought it was a little cheaper, but I guess not by much.

 

So what type of bolt did you end up using? Also, is the install the same? The Escape parts look exactly the same to me.

 

I found somthing at an Ace hardware store that fit.

 

It seems kind of generic.

 

Bringing the topic back from the dead. Does anyone know if these kits are still availible?

 

http://www.focussport.com/ford_focus_oilcooler_kit.htm

 

I was hoping for the cosworth kit.

 

I was hoping for the cosworth kit.

You can piece together the same thing using the escape oil cooler.

 

Where would I find the escape oil cooler?