[Busted_00_ZX3]

Okay here it is easy as crap. I did my contribution to the jet.

Okay if you look at the diagram the bottom two on the legend is what you will need from radio shack (resistor, capacitor). Disregarg the two for the PC board.

There are the part numbers so it retard proof.

I would really recommend heat shrinking everythig to make a nice clean install and for it not to come loose or moisture getting in ect.
The whole process with the right tool should take no longer than 5 minutes.
Let me know if you hae any questions.
Anthony

 

[Nliiitend1]

Nice! :thumbup:

 

[Silfox]

Old Skool FTW!!

 

[whyme]

well if you guy need these parts let me know, 30% off. im pissed i paid $70 for mine, im really pissed.

anyone know where i can get the connectors? ill make these and sell em for what you would pay to make em anyway.

 

[Busted_00_ZX3]

well if you guy need these parts let me know, 30% off. im pissed i paid $70 for mine, im really pissed.

anyone know where i can get the connectors? ill make these and sell em for what you would pay to make em anyway.

Do whata whata what? No way dude. You paid for exactly what you see above in a pretty package. (i think the resistor is different). The one stated above is more apporpiate for the Ford oxys. :thumbup:

 

[whyme]

Do whata whata what? No way dude. You paid for exactly what you see above in a pretty package. (i think the resistor is different). The one stated above is more apporpiate for the Ford oxys. :thumbup:

ahhhhhhhh!!! wtf i work in an electronics store and didnt bother to do my homework... adisfgvlhlihasdfhlisdhcinsduhf;iaufvkas!!!!!!!! ahhhhhhhhh :bang:

 

[OmniFocus]

Does anybody have proof that works?

A capacitor between two constant DC signals is as good as an open.

...and a Megohm resistor might as well be an open.

 

[TXFO]

the cap is for filtering. The resistor value I have no idea about. I'd have to see the voltage being produced, and I think the resistor value may correlate to the capacitor for the filtering. :dunno:

 

[whyme]

mabe ill disect mine this weekend and post the results.

 

[Silfox]

That digram is about 4 years old, so Im sure its been used plenty of times.

 

[Busted_00_ZX3]

ahhhhhhhh!!! wtf i work in an electronics store and didnt bother to do my homework... adisfgvlhlihasdfhlisdhcinsduhf;iaufvkas!!!!!!!! ahhhhhhhhh :bang:

Yea i know your pain. I bought one too in the past. It went bad and used this diagram and it works like a charm.

 

[whyme]

im going to take my rage out on the parts drawers now...

 

[zx3 ride]

am a newbie so dont :lol:
what exactly does this mod do

 

[whyme]

if you install a header on an engine that replaces the manifold w/ Cats then the ecu will read an error code because the downstream o2 readings will be diff. this mod ulters the output of the downstream o2 to keep the ecu from throughing a code.

 

[Busted_00_ZX3]

Okay disregard the PC board items. The first two on the illustration. The onyl thing you will fab is the resistors and capacitors.

 

[SicZTS]

That's a nice little piece man, but all you really need is one resistor, (I believe it's 1 megaohm), in one wire, (I believe it's the signal wire). It's been a long time but that's all I did in my ZTS & I ran it like that for almost 2 years, MIL free. If anyone cares, I'll check on it to be sure.

 

[Busted_00_ZX3]

That's a nice little piece man, but all you really need is one resistor, (I believe it's 1 megaohm), in one wire, (I believe it's the signal wire). It's been a long time but that's all I did in my ZTS & I ran it like that for almost 2 years, MIL free. If anyone cares, I'll check on it to be sure.

Oh snap that cool.
But, the point of the capacitor is that it it thinks its acually getting signal from the o2 rather than a disturbed signal.

 

[SicZTS]

I hear ya... though the PCM doesn't know any different. As long as it sees a drastically toned-down version of the signal that the first O2 is putting out, it's happy.

 

[Busted_00_ZX3]

Oh no kidding good to know.

 

[Compuzen]

I'm digging this out of the forums grave site lol, but does anyone know if this will work on a 98 dodge the same way? The Cat is toast and i just want to pipe it.